Electronic warfare in the optical band: Main features,examples and selected measurement data

The paper presents the possibilities of, and methods for, acquiring, analysing and processing optical signals in order to recognise, identify and counteract threats on the contemporary battleground. The main ways electronic warfare is waged in the optical band of the electromagnetic wave spectrum have been formulated, including the acquisition of optical emitter signatures, as well as ultraviolet (UV) and thermal (IR) signatures. The physical parameters and values describing the emission of laser radiation are discussed, including their importance in terms of creating optical signatures. Moreover, it has been shown that in the transformation of optical signals into signatures, only their spectral and temporal parameters can be applied. This was confirmed in experimental part of the paper, which includes our own measurements of spectral and temporal emission characteristics for three types of binocular laser rangefinders. It has been further shown that through simple registration and quick analysis involving comparison of emission time parameters in the case of UV signatures in “solar-blind” band, various events can be identified quickly and faultlessly. The same is true for IR signatures, where the amplitudes of the recorded signal for several wavelengths are compared. This was confirmed experimentally for UV signatures by registering and then analyzing signals from several events during military exercises at a training ground, namely Rocket Propelled Grenade (RPG) launches and explosions after hitting targets, trinitrotoluene (TNT) explosions, firing armour-piercing, fin-stabilised, discarding sabots (APFSDS) or high explosive (HE) projectiles. The final section describes a proposed model database of emitters, created as a result of analysing and transforming the recorded signals into optical signatures.     

关于在公安现役部队推行全面预算管理的几点思考

对现阶段公安现役部队全面预算管理现状和面临的问题进行了分析,从确定部队战略目标,党委重视和全员参与,构建全面预算管理组织结构及制度体系,全面预算的编制、控制、调整及考评等几个方面提出了有效实施全面预算管理的思路和具体措施。     

Ka波段VCO控制信号发生器设计及调制域测试方法

采用DSP的SPORT端口控制16位高速串行DAC，设计了任意电压信号发生器，用于控制Ka波段连续波雷达压控振荡器产生频率可任意调制的发射信号。利用该信号发生器与调制域分析仪，测试了压控振荡器的调制特性和阶跃响应。     

Adaptive random search for continuous simulation optimization

We present, analyze, and compare three random search methods for solving stochastic optimization problems with uncountable feasible regions. Our adaptive search with resampling (ASR) approach is a framework for designing provably convergent algorithms that are adaptive and may consequently involve local search. The deterministic and stochastic shrinking ball (DSB and SSB) approaches are also convergent, but they are based on pure random search with the only difference being the estimator of the optimal solution [the DSB method was originally proposed and analyzed by Baumert and Smith]. The three methods use different techniques to reduce the effects of noise in the estimated objective function values. Our ASR method achieves this goal through resampling of already sampled points, whereas the DSB and SSB approaches address it by averaging observations in balls that shrink with time. We present conditions under which the three methods are convergent, both in probability and almost surely, and provide a limited computational study aimed at comparing the methods. Although further investigation is needed, our numerical results suggest that the ASR approach is promising, especially for difficult problems where the probability of identifying good solutions using pure random search is small. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

基于模糊基函数网络的机械臂免模型输出反馈PD控制

针对无速度信息的机械臂轨迹跟踪控制问题,提出了一种带观测器的机械臂免模型模糊基函数网络输出反馈PD控制。所设计的模糊基函数网络被用来估计关节速度,并同时用来补偿系统的未知不确定。网络的权值及参数调整采用混合算法,且能够在线自适应实时调整,不需要离线学习阶段。所提出的观测器及控制器均不需要任何的机械臂动态模型(包括惯性矩阵逆),并通过引入PD控制使整个方案更易工程实现。基于Lyapunov理论证明了整个闭环系统一致最终有界。两关节机械臂试验结果进一步证明了这种基于观测器的反馈控制算法的有效性。     

交流感应电动机精确解耦的自抗扰控制

为了实现交流感应电动机高性能调速,快速跟踪变化的负载转矩,对静止两相αβ坐标系中的电动机数学模型精确反馈线性化,实现转速和转子磁链系统的完全解耦。针对解耦的转速和磁链子系统的设计2个结构完全相同的自抗扰控制器,实现对转速和磁链的完全独立控制。实验研究表明:电动机转速和磁链分别大约在0.7 s和0.3 s时达到参考值;负载转矩的变化将引起转速7 rad·s~(-1)范围内的变化,但磁链仍保持给定值;当转速稳定时,电磁转矩在1 s时间内能快速跟踪变化的负载转矩,其超调量不超过20 N·m;控制系统能适应转子电阻±10%和定子电阻+10%范围的变化。     

基于跟踪连续性的多传感器多跟踪任务管理方法

雷达组网系统中,当进行多目标连续性跟踪时,传统跟踪方法过多关注多传感器之间的跟踪精度和切换率,而轻视跟踪的连续性,无法满足现有连续性跟踪工程需求。因此,提出了一种新的基于跟踪连续性的多传感器多跟踪任务资源管理算法,该算法分为两个优化过程,第1次优化过程尽量保证跟踪目标个数的最大化,第2次优化过程中提出了一种用于衡量目标跟踪连续性的优化指标,基于该指标,提出了一种快速的传感器资源管理算法。仿真结果表明,该算法能够在较短的时间内对多传感器进行有效的快速分配,既跟踪了更多的目标,又保持了跟踪的连续性。     

离散作战模型的连续化兰切斯特模型研究

通过兰切斯特方程的分析,定义了作战力量变换系数概念,推导出作战力量变换系数的兰切斯特方程,得到了衡量交战双方作战力量等效值,而作战力量变换系数的兰切斯特方程正是适用于离散型作战的兰切斯特作战模型,使具有深刻影响力的兰切斯特方程适用范围扩大到了交战双方离散数量型的作战领域,从而赋予兰切斯特方程新的生命,为复杂的格斗作战分析提供了新的工具。     

具有连续反馈的在线草图符号识别算法

当前多数在线草图符号识别方法是在用户绘制完图形后,通过点击按钮或等待一定时间来反馈识别结果。为提供连续反馈,提出了一种基于图元的部分草图识别算法:对输入笔画进行笔画分割得到图元表示,提取表示两个图元空间关系的新特征,依据指派问题模型,通过该特征的相似度识别符号。算法简单,无须训练,而且与笔顺、笔画数和图形大小无关。实验证明了方法的有效性。     

基于继电辨识自整定控制器的研究

为了在复杂的动态操作环境下实现PID参数的自整定,探讨了基于继电反馈的参数自整定法,仿真结果表明使用该方法可以轻易实现自整定.一方面证明了这种识别和控制程序的先进、简单.另一方面,与以往的方法相比,这种新控制器有更强的抗干扰性、更好的鲁棒性能和动态响应.此外,该方法成功地应用于有大的时间滞后的一阶加纯滞后(FOPDT)系统,这是其他传统PID自整定方法所不能实现的.